BAIKE X20 Airless Paint Sprayer 2HP for Home Use
BAIKE X20 Airless Paint Sprayer – 2HP Power for Home and DIY Projects
The BAIKE X20 Airless Paint Sprayer is perfect for home renovations and DIY projects. With a 2HP brush motor, this lightweight sprayer delivers smooth, even coatings for walls, furniture, and small-scale projects. Its high-pressure technology ensures professional results for homeowners and small contractors.
**Why Choose BAIKE X20?**
- Efficient Spraying: Up to 22.5 MPa pressure for uniform finishes.
- Versatile Coatings: Supports latex, acrylics, and water-based anti-rust paints.
- Ultra-Portable: 12.7kg design for easy maneuverability.
- Complete Kit: Includes 15m hose and K9 spray gun for quick setup.
**Technical Specifications**:
- Voltage: 220V, 50Hz
- Max Pressure: 22.5 MPa
- Max Flow Rate: 2.0 L/min
- Motor: 2HP Brush
- Max Nozzle: 621
- Weight: 12.7kg (18.7kg with packaging)
- Dimensions: 45 x 35 x 57 cm
**Suitable Coatings**:
Latex paint, water-based coatings, primers, acrylic paint, medium/low-viscosity anti-corrosion paint, water-based anti-rust paint, small-area fire-resistant paint, wood primers.
**What’s Included**:
- 1 BAIKE X20 Main Unit
- 1 x 1/4" x 15m High-Pressure Hose
- 1 K9 Spray Gun
- 1 x 0.5m Extension Rod
- Lubricant, Tool Kit, Manual
Order the BAIKE X20 today for effortless home painting with professional results!
Styled With
Before use
Check the power supply voltage (ensure it matches the equipment specifications), inspect the grounding wire for proper connection (to prevent electrical leakage), examine the high-pressure hose, spray gun, and connectors for any damage or loose connections, select the appropriate nozzle and install it securely, ensure the paint is thoroughly mixed and filtered (to prevent nozzle blockage), verify the paint viscosity is appropriate (if too thick, dilute according to product specifications), and perform a test spray on scrap cardboard or an open area to adjust the pressure.
in use
When spraying, always keep the nozzle perpendicular to the surface and move it evenly. Do not point the nozzle at people or body parts (high-pressure spray can pierce the skin). The spray gun must have a safety lock device. Lock the trigger when not in use. Keep the nozzle clean. If it becomes blocked, shut down the machine, release the pressure, and then clean it.Do not disassemble the machine's pressurised components without authorisation.
Before use
After spraying is complete, the pressure must be released (turn off the power supply and open the pressure relief valve). Immediately rinse the piping, spray gun, and pump body with a cleaning solution (clean water or diluent) to remove any residual paint, preventing the pump body from clogging due to paint buildup. Regularly inspect the seals and filters, and replace them promptly as needed.